更多工件,更多利润

钳口独立运行

Friction pins on the vise trucks allow for independent movement on the lead screw while still providing maximum clamping force.

外形小巧

Fit more vises on your machine table and watch your parts per cycle soar. Increase throughput, decrease tool change time and machine down time between operations.

工作台空间最大化

Make your existing equipment more efficient by running multiple parts per cycle. Hold larger parts with the DV510, or load up on smaller parts with the DV75150X.
钳口独立移动

The center jaw is the fixed position to ensure proper clamping no matter the conditions. Machine different parts on the same vise simultaneously, or simply negate small variations in stock size.
钳口可反转,增大夹持范围

Have a larger part? Jaws can easily reverse to accommodate larger stock. Convert the double-station to a single-station for even more clamping range. One vise, many options.
锯齿+燕尾,夹持力的双重保证

Serrated teeth on each jaw provides maximum grip on stock less than HRC 35. For harder material, the built-in dovetail provides exceptional clamping force without the need for a stamping machine and with even less torque.
灵活转换为单工位虎钳

Convert to single-station and back in just a few minutes. The vise base has two precision bores that allow for shoulder bolts to lock the back jaw when switching to a single station.

关注我们

联系我们

版权所有©2021  苏州鼎锐机电商贸有限公司  苏ICP备20018037号-3
栏目 产品 展会 电话